3
53
Shooting
1 Press C in standby mode.
2 Select a flash mode.
Available operations
3 Press E.
The camera returns to standby mode.
4 Press 1.
The built-in flash is popped up.
t Memo
• The flash modes that can be selected vary depending on the
capture mode.
The built-in flash cannot be used for some S modes and
for Y mode. (p.110)
• You cannot take pictures while the built-in flash is being
charged. If you want to take pictures while charging the flash,
set [22 Release While Charging] in the E4 menu.
• Depending on the lens being used, the use of the built-in flash
may be limited. (p.114)
Using the Built-in Flash
A
Auto Flash
Discharge
Automatically measures the ambient light and
determines whether to use the flash.
B
Auto Flash
+ Red-eye
Reduction
Discharges a pre-flash for red-eye reduction
before an automatic flash.
C
Flash On Discharges a flash for each picture.
D
Flash On
+ Red-eye
Reduction
Discharges a pre-flash for red-eye reduction
before the main flash and discharges a flash
for each picture.
E
Slow-speed
Sync
Sets to a slow shutter speed and discharges a
flash for each picture.
Use this, for example, when shooting a portrait
with the sunset in the background.
F
Slow-speed
Sync+Red-
eye
Discharges a pre-flash for red-eye reduction
before the main flash is discharged with Slow-
speed Sync.
H
G
Trailing
Curtain
Sync
Discharges a flash immediately before closing
the shutter.
Sets to a slow shutter speed.
Captures moving objects as if they are leaving
a light trail behind them.
K
Manual
Flash
Discharge
Sets the amount of flash discharge between
FULL and 1/128 power.
0.0
EV
±0
EV
Auto Flash Discharge
Cancel
OK
R Compensates the flash exposure.
Selects the amount of flash discharge (when
[Manual Flash Discharge] is selected).
M Resets the compensation value to the
default setting.
Capture Mode Selectable Flash Mode
R, S* A, B, C, D
G, H, J C, D, E, F, H, K
I, K, L, M C, D, G, K
