1
13
Introduction
You can change the type of information displayed in standby
mode by pressing G while the control panel is displayed.
Use CD to select the type and press E.
When shooting with the viewfinder
When shooting with Live View
t Memo
• The status screen is displayed when the camera is turned off
and on again. If [Shooting Info Display] is set to [On] in
[Memory] of the A4 menu, the screen selected on the
Shooting Info Display selection screen appears when the
camera is turned off and on again. (p.105)
Shooting Info Display
Status
Screen
Displays the settings for shooting with the
viewfinder. (p.11)
Electronic
Level
Displays the camera
angle.
A scale indicating the
horizontal camera
angle appears at the
center of the screen,
and a scale indicating
the vertical camera
angle appears on the
right or left side. When
the angle exceeds the range that can be
displayed in the scale, the indicators on the scale
are displayed in red.
Display
Off
Nothing is displayed on the monitor.
Electronic
Compass
The current latitude, longitude, altitude, direction,
Coordinated Universal Time (UTC), capture
mode, and exposure value are displayed. Turn
the camera off and on again to return to the status
screen.
Available only when the optional GPS unit is
attached to the camera and is operating. (p.117)
1/
250
1/
250 F5.6F5.6 16001600 0.00.0
Example:
Tilted 1.5° to the left
(yellow)
Vertically level (green)
Standard
Information
Display
The Live View image and the settings for
shooting with Live View are displayed. (p.11)
Electronic
Level
The same electronic level as when shooting
with the viewfinder is displayed.
No
Information
Display
Certain icons, such as those for the capture
mode and drive mode, are not displayed.
