19
2. Copying
Basic Procedure
Preparation
When User Code Authentication is
set, the screen for entering a user
code will be displayed. Enter your
user code using the number keys,
and then press the {
{{
{#}
}}
} key.
When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, the authenti-
cation screen will be displayed.
Enter your login user name and
user password, and then press
[Login]. See "When the Authentica-
tion Screen is Displayed", General
Settings Guide.
Reference
For user codes, see "Authentica-
tion Information", General Settings
Guide.
Note
❒ To copy onto thick paper of 127
g/m
2
(34 lb.) or heavier, specify the
paper thickness under "Paper
Thickness Settings" in User Tools.
See "Paper Thickness Setting", Gen-
eral Settings Guide.
A
AA
A
Make sure "d
dd
d Ready" is shown
on the display.
If any other function is displayed,
press the {
{{
{Copy}
}}
} key.
❖
❖❖
❖ Initial copy display
B
BB
B
Make sure no previous settings
remain.
Note
❒ When there are previous set-
tings remaining, press the {
{{
{Clear
Modes}
}}
} key before entering your
settings.
C
CC
C
Place the originals.
Reference
p.13 “Placing Originals”
D
DD
D
Make the necessary settings.
Reference
Refer to each function.
E
EE
E
Enter the required number of cop-
ies using the number keys.
Note
❒ The maximum copy quantity
that can be set is between 1 and
999.
F
FF
F
Press the {
{{
{Start}
}}
} key.
Copying starts.
Note
❒ When placing originals on the
exposure glass, press the {
{{
{#}
}}
}
key after all the originals are
scanned.
❒ Copies are delivered face down.
Important
❒ When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, always log
off when you have finished using
the machine to prevent unauthor-
ized users from using the machine.
VenusC1_GB_Copy_F1_FM.book Page 19 Tuesday, January 17, 2006 3:43 PM
