Specifications
168
7
❖
❖❖
❖ Finisher MEC BK (saddle stitch)
You cannot change the stapling positions during copying.
When the original image is rotated, the stapling direction turns by 90°.
When “Top” or “Bottom” is selected and the paper with the same orienta-
tion as the original is not loaded, the image is rotated and the paper with
the same size and the different orientation is selected.
With certain stapling settings, you cannot use the Rotate function.
If you select Saddle Stitch function with the Finisher MEC BK (saddle
stitch), the machine staples and folds the paper in the centre, then delivers
the paper folded.
If you select Saddle Stitch function in Magazine mode, the machine staples
the paper, and folds it like a book, then delivers the paper folded.
❖
❖❖
❖ Punch
• With certain Punch function settings, the Rotate function cannot be used.
• You cannot punch on thick paper heavier than 157 g/m
2
.
• Since punch holes are made in each copy, positions vary slightly.
• Punchable paper sizes are as follows:
Paper Sizes and Orientation
Maximum Number
of the Sheets
Maximum Number
of the Stapled Copies
Finisher Tray
A4
K
, 8
1
/
2
"
×
11"
K
13-50 sheets 150-40 sets
2-12 sheets 150 sets
A4
L
, B5
KL
, 8
1
/
2
"
×
11"
L
10-50 sheets 100-20 sets
2-9 sheets 100 sets
Other paper size 10-30 sheets 100-33 sets
2-9 sheets 100 sets
In the Mixed Size Mode 2
∼
30 sheets 50 sets
Booklet Tray
(Saddle Stitch)
A3
L
, B4
L
, A4
L
,
B5
L
, 11"
×
17"
L
,
8
1
/
2
"
×
14"
L
,
8
1
/
2
"
×
11"
L
,
12"
×
18"
L
2-5 sheets 30 sets
6-10 sheets 15 sets
11-15 sheets 10 sets
VenusC1_GB_Copy_F1_FM.book Page 168 Tuesday, January 17, 2006 3:43 PM
