Connect Copy
114
4
System Settings on Main and Sub-
machines
This section explains the System Settings on the two machines during Connect
Copy.
Reference
See “User Tools (System Settings)”, General Settings Guide.
Note
❒ In Connect Copy mode, the User Tools/Counter key on the sub-machine is
disabled. To access User Tools on the sub-machine, first exit from Connect
Copy mode.
❍: The main and sub-machines are independent from each other.
←: The settings on the main machine applies to both machines.
—: Not related to the settings.
$: Depends on the function.
❖
❖❖
❖ General Features
Main machine Sub-machine Remarks
Panel Tone
❍❍
Warm Up Notice
❍❍
Copy Count Display ——The copy counter is
always displayed as
Up (count up).
Function Priority ——When the Auto Reset
time of the main ma-
chine has lapsed,
Connect Copy will be
cancelled. After that,
the machine switches
back to the mode se-
lected in Function
Priority upon reach-
ing the System Reset
time.
Print Priority ——
Function Reset Timer ——
Interleave Print ——
Output Tray Setting
❍❍
Output: Copier
❍❍
Output: Document
Server
❍❍
Output: Printer
❍❍
VenusC1_GB_Copy_F1_FM.book Page 114 Tuesday, January 17, 2006 3:43 PM
