A SERVICE OF

logo

User Tools (Copier / Document Server Features)
154
6
Stamp Setting
You can have the text printed on
the first page or all pages.
Note
Default: All Pages
Size
You can select the size of the stamp
printed in Stamp Text mode.
Note
Default: Auto
Superimpose
You can have page numbers print-
ed as a negative where they over-
lap black parts of the image.
Note
Default: No
Stamp Colour
You can set the selected priority
colour when printing the text.
Note
Default: Black
Input / Output P.
1
/
2
Switch to Batch (SADF)
You can select to have the Batch or
SADF function displayed when
you press [Special Original]. See p.15
Batch.
Note
Default: Batch
SADF Auto Reset
In SADF mode, an original must be
set within a specific time after the
previous original has been fed.
You can adjust this time from 3 sec-
onds to 99 in 1 second increments.
Note
Default: 5 seconds
Rotate Sort: Auto Paper Continue
You can continue copying when
paper of the required orientation
has run out during rotate-sorting.
See p.43 Rotate Sort.
Note
If you select [No] :
When paper of the required
orientation runs out, the ma-
chine stops copying and
prompts you to supply copy
paper. When you load paper,
the machine will continue
copying.
If you select [Yes] :
Copying continues using copy
paper of a different orienta-
tion. The copy job will finish
even if the machine is left un-
attended.
Default: No
Auto Sort
You can specify whether the Sort
function is to be selected when the
machine is turned on, or when the
functions are cleared.
Note
Default: No
Memory Full Auto Scan Restart
If memory becomes full while
scanning originals, the machine
will copy the scanned originals
first, and then automatically pro-
ceed scanning remaining originals.
You can enable or disable this
function.
Note
If you select [No] :
When memory becomes full,
the machine stops operation,
allowing you to remove the
copies on the output tray.
VenusC1_GB_Copy_F1_FM.book Page 154 Tuesday, January 17, 2006 3:43 PM