Troubleshooting
128
5
If You Cannot Exit from Connect Copy
Problem Causes Solutions
There is no response when
you press []
Scanning of originals is still
in progress.
Press the {
{{
{Clear/Stop}
}}
} key on the
main machine, and then press [Yes].
Copying is in progress.
A paper misfeed has oc-
curred on either the main
or sub-machine.
Follow the instructions displayed.
Reference
“Clearing Misfeeds”, General
Settings Guide
“Removing Jammed Staples”,
General Settings Guide
“Removing Punch Waste”, Gen-
eral Settings Guide
If the sub-machine's display indi-
cates that a cover is open, follow the
instructions shown.
To cancel Connect Copy, Press the
{
{{
{Clear/Stop}
}}
} key on the main ma-
chine, and then press [Yes].
A paper misfeed has oc-
curred on either machine,
or toner or other supplies
need to be replenished.
Follow the instructions displayed.
Reference
“Adding Toner”, General Settings
Guide
“Clearing Misfeeds”, General
Settings Guide
“Loading Paper”, General Set-
tings Guide
"Adding Staples", General Set-
tings Guide
"Removing Punch Waste", Gen-
eral Settings Guide
To cancel Connect Copy, Press the
{
{{
{Clear/Stop}
}}
} key on the main ma-
chine, and then press [Yes].
A paper misfeed has oc-
curred during stapling.
Removed the jammed paper.
Reference
“Removing Jammed Staples”,
General Settings Guide
To cancel Connect Copy, Press the
{
{{
{Clear/Stop}
}}
} key on the main ma-
chine, and then press [Yes].
VenusC1_GB_Copy_F1_FM.book Page 128 Tuesday, January 17, 2006 3:43 PM
