A SERVICE OF

logo

2-10 Using PC Cards
2325 Reference Guide Revision B 2325A137REFGD
Removing a PC Card
Note: If a radio card is to be removed, first disconnect the antenna
connector from the radio card before pressing the Ejector Tab.
Figure 2-8 Removing a PC Card
1 Ejector tab
2 PC card
The Ejector Tab inside the PC card slot ejects the installed card. Push
the end of the ejector tab into the 2325. As you do so, the PC card
should slide partway out of the slot. Hold the card by the edges and pull
it the rest of the way out.