7-4 The Single Dock
2325 Reference Guide Revision B 2325A137REFGD
Using a Single Dock
Set up the Single Dock as described in the preceding sections. Place the
2325 into the dock, with the keypad facing the front. If you are using a
power adapter, the green LED labeled
READY
on the front panel of the
Single Dock should light up.
Note: If the
READY
light does not come on, make sure the
POWER
light
is on and the 2325 is fully inserted into the dock, with the
keypad facing out. If it still doesn’t work, make sure the Dock
adapter is securely attached to the 2325 and that the contacts
in the dock are clean. (If you are not using a power adapter,
the light will not come on.)
While the 2325 is in the Single Dock, you can download programs to it
or upload data from it just as if it were connected directly to your
computer. You can even leave the 2325 in the dock while you use an
attached barcode reader.
If you are using a nickel metal hydride (NiMH) battery pack in the 2325,
you can use the Single Dock to recharge the batteries. Simply leave the
battery pack in the 2325 when you place it in the dock. The battery pack
and the lithium backup battery will be recharged while the
READY
light
is on. The charging time is 3 to 8 hours, depending on the type of battery
pack and the current charging level.
Technical Specifications
Single Dock
Parameter Specification
Height 2.75” (6.9 cm)
Width 6” (15 cm)
Depth 5.25” (13.33 cm)
Weight 1.15 lbs (.52 kilograms)
Usage Indoors
