A SERVICE OF

logo

Open as PDF
next previous
Default 4-9
2325A137REFGD Revision B 2325 Reference Guide
Default
Select this option to load the original factory configuration into your
2325. The configuration utility prepares files to be transferred to the
2325 and opens a dialog box titled “Important.” Check the file lists in
both sections of the dialog box to see if they are correct and complete. If
you need to add, delete, or rename files, select from the dialog box.
Then use the selection in the main menu to build your own lists.
Figure 4-2 Example - The Important Dialog Box
If the file lists in the dialog box are correct, make sure your 2325 is
properly connected to the serial port specified in the Comm Settings
dialog box (default is COM 1 at 9600 baud). Then run the LD.BAT file
on the 2325, and select OK in the “Important” dialog box on the
computer.