Using PC Cards 2-7
2325A137REFGD Revision B 2325 Reference Guide
Then, while pressing the round button above the slot cover, slide the
cover out and away from the 2325.
Note: The locking screw cannot be completely removed from the PC
card slot cover. To keep the screw from catching on the unit,
turn the 2325 face up when you pull the cover out.
Note: Turn the 2325 off before removing or inserting a PC card.
Figure 2-4 Typical PC Card
All PC cards have two rows of small sockets on one end. The cards also
have face-up and face-down sides. The card manufacturer’s label is
usually on the face-up side.
Inserting a PC Card
Figure 2-5 Inserting a PC Card
1 Ejector tab
2 PC card
With the 2325 face down and the PC card face up, insert the end of the
card with the sockets into the card slot. There are two tracks inside the
slot to help you guide the card.
