Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation3-24
I/O groups are protected when front panel lock mode 2 is selected. You can
view the groups in lock mode 2, but not change them from the front panel.
If front panel lock mode 2 is selected and you try to perform steps 4 through 6,
the actions are ignored and the Enter, RGBHV/Video, and Audio buttons flash.
4. Press and release the input 1 through 4 and output 1 through 4 buttons
(figure 3-33).
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
I
N
P
U
T
S
O
U
T
P
U
T
S
ress and release the Input 1 through Input 4 buttons.
he selected buttons light green.
ress and release the Output 1 through Output 4 buttons.
he selected buttons light green.
Figure 3-33 — Assign inputs and outputs
5. Press and release the Preset button to select group 2 (figure 3-34).
C O N T R O L
PRESET
ENTER
ESCVIEW
1324
Press and release the Preset button to select group 2.
T
he button lights amber to indicate the selection.
Group #
Figure 3-34 — Select an I/O group
