4-13CrossPoint 450 Plus and MAV Plus Switchers • Programmer’s Guide
Command/response table for SIS commands (Cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Save, recall, and directly write presets (continued)
Read room outputs
Esc
X
MR
,
,
Y
,
Y
Example:
Esc
3MR Class 1,01,02,08,09 Outputs 1, 2, 8, and 9 are
assigned to room 3, which is
named “Class 1”.
Recall a room preset
X
*
X12
. Rmm
•Rpr
X12
Command character is a period.
Directly write a room preset
Esc
+
X
*
X12
P
X
*
X
!
X
*
X
%
X
*
X
$…
X
*
X
& Enter as many ties as are valid
Rmm
•Spr
X12
for this model. Tie all (!), tie
RGBHV (&), tie video (%), and
tie audio ($) commands are all
valid.
Example:
+7*3P12*7&13*35$4*26%6*6!
Esc
Brackets are shown to separate ties
Rmm07•Spr03 for clarity only. Create preset 3
for room 7, which ties audio
input 12 to output 7, video input
13 to output 35, RGBHV input 4
to output 26, and video and
audio input 6 to output 6.
Lock (executive) modes
See “Setting the front panel locks (Executive modes)” in chapter 3, “Operation” for more
information on the Lock modes.
Lock all front panel functions 1X Exe1 Enable Lock mode 1.
Lock advanced front panel functions 2X Exe2 Enable Lock mode 2.
Unlock all front panel functions 0X Exe0 Enable Lock mode 0.
View Lock mode X
X
Resets
Reset global presets and names
Esc
ZG Zpg Clear all global presets and their
names.
Reset an individual global preset
Esc
X11
ZG Zpg
X11
Clear global preset
X11
.
Reset RGB delays
Esc
ZD Zpd Reset all RGB delays to 0.0
seconds.
Reset audio input levels
Esc
ZA Zpa Reset all audio input levels (gain
and attenuation) to 0 dB.
Reset audio output levels
Esc
ZV Zpv Reset all audio output levels
(volume) to 100% (no attenuation).
Reset all mutes
Esc
ZZ Zpz Reset all video and audio mutes.
Reset room map
Esc
ZR Zpr Clear all room presets.
Reset individual room
Esc
X
ZR Zpr
Clear all presets for room
X
.
Reset individual room preset
Esc
X
*
X12
ZP Zpp
*
X12
Clear individual room preset and
name.
Reset flash
Esc
ZFFF Zpf Reset flash memory (erase user-
supplied files).
Reset whole switcher
Esc
ZXXX Zpx Clears all ties and presets, resets
all audio gains to 0 dB, and resets
volume to 100%.
Absolute reset
Esc
ZQQQ Zpq Similar to Reset whole switcher,
plus clears IP address to
192.168.254.254 and subnet mask
to 255.255.0.0.
