A SERVICE OF

logo

1Install and cable a G600 cabinet
Cable a G600 system
S8100 Installation and Upgrades 79
November 2003
Figure 12: Processor cabinet’s TDM-/LAN-bus terminators
Install Processor Interface cable
1 Connect the Processor Interface cable to the slot 2 connector behind the processor cabinet. See
Figure 13, G600 cable connections,
on page 80.
2 Install the IP Media Processor adapter and 259A C-LAN adapter on the appropriate connectors
behind the processor cabinet.
3 Install connector retainers.
4 Secure cables with tie-wraps for strain relief.
Figure notes
1 TDM-/LAN-bus terminators on the left and
right TDM-/LAN-bus pin fields.
TO
P
TO
P
cadptdm1 KLC 102600
1 1
A