A SERVICE OF

logo

JInstall and cable a CMC1 cabinet
Install equipment-room hardware for CMC1
S8100 Installation and Upgrades 383
November 2003
Label the main distribution frame
Figure 75, Label graphic symbols and nomenclature, on page 384 shows the graphic symbols used on the
supplied labels for the system, cross-connections, information outlets, and cables.
1 Write the floor and building identification on each label as required.
2 Insert the labels into the plastic holders.
3 Snap the holders into the appropriate locations on the MDF.
43/18 18
44/19 19
45/20 20
46/21 21
47/22 22
48/23 23
49/34 24
50/25 25
Table 64: Sneak fuse connector pinout 2 of 2
Connector pin
numbers
Pair/fuse
number
2 of 2