DRecovery
Communication Manager software reset (recovery)
320 S8100 Installation and Upgrades
November 2003
Reset System 1 (Communication Manager
warm start)
• This recovery takes about 60 seconds.
• All software is reset.
• Every stable phone call remains up.
• In-progress calls are dropped.
• No new calls can be made during this time.
Reset System 2 (Communication Manager
cold start)
The following are reset:
• All software
• TDM bus
• Every port circuit pack
Every telephone session is dropped. Telephones begin to reconnect to the switch within 60 seconds.
Reset System 3 (Communication Manager
reboot)
This is the same as the following Reset System 4. This command is retained for consistency with other
Avaya products.
Reset System 4 (Communication Manager
reboot)
• Emergency Transfer is invoked in this reset.
• System processes are reloaded from hard disk into memory.
• Every port circuit pack is reset.
• Every telephone session is dropped.
Telephones begin to reconnect to the switch within 60 seconds.
Reset System 5 (system reboot)
This is the same as Reset System 4 (see above).
