A SERVICE OF

logo

2-312
SHOW BOOTP
SHOW BOOTP
Use the SHOW BOOTP command to display the current BootP settings.
Format
Example
The following command displays current BootP settings:
CB5000> show bootp
——- BOOTP VARIABLES ——-
Bootp Server IP Address: 255.255.255.255
BootP Power Up Mode: ENABLED
BootP Result: NO RESPONSE
Related Commands
BOOTP
CLEAR BOOTP
SET BOOTP POWER_UP_MODE
SET BOOTP SERVER_IP_ADDRESS
show bootp
BootP Result Definition
CLEAR The last BootP result was cleared by the user (CLEAR BOOTP
command).
REQUEST IN PROGRESS The hub has sent a BootP request.
OKAY BootP completed successfully.
NO RESPONSE The hub did not receive a response to its BootP request.
FATAL ERROR The BootP software reported a fatal error in operation.