A SERVICE OF

logo

SET TERMINAL DATA_BITS
2-255
SET TERMINAL
DATA_BITS
Use the SET TERMINAL DATA_BITS command to set the number of data bits
used for a serial (Console or Auxiliary) port.
Format
Example
The following command sets the Auxiliary port data bits to 7:
CB5000> set terminal auxiliary data_bits 7
Terminal parameter changed.
Related Command
SHOW TERMINAL
set terminal
bits
data_bitsconsole
auxiliary
console
Selects the Console port as the serial port for this operation.
auxiliary
Selects the Auxiliary port as the serial port for this operation.
bits Selects the number of data bits for the serial port.
bits = 7 or 8
The factory default setting is 8.