A SERVICE OF

logo

BOOTP
2-3
BOOTP
Use the BOOTP command to download configuration information from the
bootptab file on a BootP server to a DMM. BootP (Bootstrap Protocol) is a UDP/
IP-based protocol (User Datagram Protocol/Internet Protocol) that allows a device
to configure itself dynamically without user intervention.
Format
Example
The following command initiates the BootP function on the DMM:
CB5000> bootp
Related Commands
CLEAR BOOTP
SET BOOTP MODULE
SET BOOTP POWER_UP_MODE
SET BOOTP SERVER_IP_ADDRESS
SHOW BOOTP
bootp