SET TR_SURROGATE CRS_STATION
2-265
SET TR_SURROGATE
CRS_STATION
Use the SET TR_SURROGATE CRS_STATION command to enable the TR-NMC’s
Configuration Report Server Station features.
Format
Example
The following command enables maximum token access priority on the TR-NMC
in slot 11.2:
CB5000> set tr_surrogate 11.2 crs_station allow_acc_pri
00:04:e4:40:00:c0 enable
Related Commands
SET TR_SURROGATE SURR_STATUS CRS_ADMIN
SHOW TR_SURROGATE
set tr_surrogate
slot.
2
crs_station
setting
mac address
setting
slot Specifies the hub slot number where slot = 1 through 17
setting The following settings are available:
■
allow_acc_pri
Lets you specify the maximum token access priority that the
station with the indicated MAC address is allowed to transmit.
■
enb_fun_class
Lets you enter the function classes that the station with the
indicated MAC address is allowed to transmit.
■
phy_loc
Lets you set the physical location subvector that is transmitted
as part of Report Ring Station Addresses MAC Frames sent by
the station with the indicated MAC address.
■
remove_sta
Lets you send a request to remove the station with the
indicated MAC address from the ring.
mac address The MAC address for which you are setting this parameter.
setting Enable or disable.
