A SERVICE OF

logo

2-280
SET VBRIDGE AFT BRIDGE_PORT
Example
The following command enables source checking for all MAC addresses of
devices attached to port 3.5. Before forwarding any packet that arrives on port
3.5, the SwitchModule searches the address table to verify that the packet’s
source MAC address is valid for port 3.5.
CB5000> set vbridge 2 aft bridge_port 3.5 all source_check enable
AFT Set Succeeded: Vbridge 2 Address 10-00-5a-f1-23-45
AFT Set Succeeded: Vbridge 2 Address 10-00-53-11-23-4a
Related Commands
SET VBRIDGE AFT ALL
SET VBRIDGE AFT MAC
SHOW VBRIDGE AFT