A SERVICE OF

logo

SET DEVICE TRAP_RECEIVE
2-115
SET DEVICE
TRAP_RECEIVE
Use the SET DEVICE TRAP_RECEIVE command to configure the DMM to receive
alerts (traps) from other SNMP devices on the network. You must also add the
DMM’s IP address to the community tables of all other SNMP devices.
Format
Example
The following command enables the DMM to receive traps from other SNMP
devices on the network:
CB5000> set device trap_receive enable
TRAP option ENABLED.
Related Commands
SAVE DEVICE
SHOW DEVICE
disable
Disables the trap receive function.
enable
Enables the trap receive function. The factory setting is enable.
set device trap_receive
disable
enable