Filter
Top Products
4220 Flow Meter
Appendix C Programming Worksheets
C-5
6. (YSI 600 D.O. Calibration only): D.O. Standard, Absolute
Barometric Pressure, Altitude
7. Altitude Units Of Measure: Ft., M (D.O. probe only)___ (job
site only)
8. (D.O. only) Enter Altitude: Altitude = _______ Feet (or
meters, at job site only)
9. Wrap D.O. Probe In Moist Cloth: Press Enter When Stable:
__.____ MG/L (at job site only)
10. Conductivity Calibration Units: Ms/cm, Ppt__________
11. Place Probe In ______Ms/cm. (or ppt) Press Enter When
Stable: _______Ms/cm (at job site only)
12. YSI 600 Dissolved Oxygen Calibration: D.O. Standard,
Absolute Barometric Pressure, Altitude
C.4 Reset Totalizer 1. Reset Totalizer: Yes, No
2. Enable Totalizer ______CF (or other units)_______
3. Reset Sampler Enable Totalizer: Yes, No
C.5 Sampler Pacing 1. Sampler Pacing: Disable, (Volume), (Flowlink), Conditional
2. Sampler Pacing: Enter Pacing Volume __.____ CF
3. Condition: Level, Flow Rate, Rainfall, D.O., pH, Tempera-
ture, YSI pH, YSI D.O., YSI Conductivity, YSI Tempera-
ture
4. Condition: Greater Than, Less Than, Rate Of Change
5. Select Operator: Done, Or, And
6. Condition True Pacing Interval: Pace Every _____ Minutes.
7. Condition False Pacing Interval: Pace Every _____ Min-
utes.
C.6 Sampler Enable 1. Sampler Enable Mode: Disable, Enable, Conditional,
(Storm), (Flowlink)
2. Level: Greater Than __.____ Feet (or meters)
3. Rainfall Amount: __.____ Inches (other units)
4. Rainfall Time Period: 15 Min, 30 Min, 1 Hr, 2 Hr, 4 Hr, 6
Hr, 8 Hr, 12 Hr, 24 Hr, 48 Hr, 72 Hr
5. Time Since Last Rainfall: Days: ______ (enter 1 to 7)
6. Condition: Level, Flow Rate, D.O., pH, Temperature, Rain-
fall, YSI pH, YSI D.O., YSI Conductivity, YSI Temperature
7. Level: Greater Than, Less Than, Rate Of Change
8. Level: Greater Than __.____ Feet (or meters)
9. Select Operator: Done, Or, And
10. Flow Rate: Greater Than, Less Than, Rate Of Change
11. When Enable Condition Is No Longer Met: Disable Sam-
pler, Keep Enabled
12. Enable Currently Latched, Reset: No, Yes