Filter
Top Products
25
Models C810 & C812 Operating Procedures
To avoid damaging the grill:
S Never use grill screens on the upper platen
or the lower grill surface.
S Never use any abrasives or cleaners other
than the approved cleaner.
S Never allow the grill scraper or the abrasive
cleaning materials to come in contact with
the release material.
Step 42
Pour a small amount of lukewarm water on a clean,
wet cloth over the bottom grill surface and wipe off
the residue.
Figure 52
Step 43
Wipe the lower grill surface with a clean, wet cloth.
Repeat until no visible soil remains.
Step 44
On a clean, sanitized, flat surface next to the sink,
clean both sides of the release material sheets by
gently wiping them with a clean, sanitized cloth.
Step 45
Place the release material sheets on a clean,
sanitized, flat surface to air dry overnight.
Step 46
Remove and empty the grease cans.
Figure 53
Step 47
Wash, rinse, and reinstall the grease cans.
24 Hour Stores Only:
Step 48
Re-install the release material s heets on the
opposite side than previously used. Secure the
sheets w ith the release material clips and retainers.
Start up the grill per instructions starting on page 10.
Figure 54