Smeg SHW1235X Microscope & Magnifier User Manual


 
EN
1
12
Activated Charcoal Filter (Recirculation Version)
This cannot be washed or regenerated, and must be changed when G starts to flash, or at least
once every 4 months. The Alarm signal, if it has been activated, only appears when the Suction
motor is turned on.
Activating the alarm signal
• In Recirculation Version Hoods, the Filter Saturation Alarm must be activated on installa-
tion or at a later date.
Turn the Lights and the Suction Motor off.
• Press F and hold for approximately 5 seconds:
Button G flashes twice -- A.C. Filter saturation alarm ACTIVATED
Button G flashes once -- A.C. Filter saturation alarm DEACTIVATED
CHANGING THE ACTIVATED CHARCOAL FILTER
Resetting the alarm signal
Turn the Lights and the Suction Motor off.
• Press button G and hold for approximately 5 seconds (See
paragraph on Use).
Changing the Filter
Remove the Metal grease filters.
• Remove the Suction Panel by unfastening the 4 screws at the
corners.
Remove the saturated Activated charcoal filter, using the hooks
provided.
Fit the new Filter, hooking it into place.
Replace the Panel and the Metal grease filters.