Filter
Top Products
30Troubleshooting
The following
message is displayed
on the LCD after you
try to copy data to a
Data Card:
Card Error
Remove Card
The Data Card is not inserted
correctly.
Ensure that the Data Card is
inserted with the arrow facing
up and pointing toward the
device.
The card is not a ResScan Data
Card.
Use a ResScan Data Card, as
specified in this manual.
You may have removed the Data
Card before data was copied to
it.
Reinsert the Data Card and wait
for the
Copy Complete
Remove Card
message to appear on the LCD.
The following
message is displayed
on the LCD after you
try to update the
settings using the
Data Card:
Settings Invalid
Remove Card
The identification details on the
Data Card do not match the
details on your device.
Contact your clinician
immediately.
The following
message is displayed
on the LCD after you
try to update the
settings using the
Data Card:
Settings Error
Remove Card
There is a data error on the Data
Card.
Contact your clinician
immediately.
The following
message is NOT
displayed on the LCD
after you try to update
the settings using the
Data Card:
Settings Success
Remove Card
The settings were not updated. Contact your clinician
immediately.
Problem Possible Cause Solution