Filter
Top Products
18How to Use the Detailed Menu
How to Change the Leak Alert Setting
Leak alert indicates when a high mask leak is present.
Scroll to LEAK ALERT and select Change (Left key). Press the Up or Down keys
to change the option to ON or OFF.
Results Menu
Select Enter (Left key) on the Results menu to access the options in this menu.
Note: Your clinician may have customised your device to display Smart Data.
Contact your clinician for further details about Smart Data.
Viewing Usage Information
You can view the total number of hours of treatment (USED HRS) and the
number of sessions for which the S8 Elite II was used in a usage period (USAGE).
Options Menu
Select Enter (Left key) on the Options menu to access the options in this menu.
How to change the language setting
Scroll to LANG and select Change (Left key). Press the Up or Down keys until
you see the language that you require.
Servicing Menu
Select Enter (Left key) on the Servicing menu to access the options in this menu.
You can view the current software version installed on your unit (SW); the serial
number of the printed circuit board in your device (PCB); and the serial number
of the device (SN).
Messages on the S8 Elite II LCD
Your clinician may have set your S8 Elite II to remind you about important events,
such as when to replace your mask, when to insert your Data Card (if your device
is Data Card enabled), and so on.
The reminder message is displayed on the LCD, and is visible if the device is not
delivering therapy. The backlight on the LCD flashes when a message is
displayed.