Filter
Top Products
20S8 Modules
S8 Modules
Note: Do not remove modules while power is connected to the S8 Elite II.
Your S8 Elite II will have one of two modules fitted to the back: a blank module
or a ResScan Data Card module.
Using a Blank Module
Please refer to the illustrations in section F of the illustration sheet.
The blank module is a protective cover on your S8 Elite II. At times, you may wish
to remove or attach the module, for example to use another module.
To remove the blank module, pull it off the back of the S8 Elite II to show the data
communications port (F-1).
To attach the blank module, push the blank module onto the data
communications port, until the module clicks into place (F-2).
Note: To protect the data communications port, always ensure there is a
module attached to the back of the device.
Using a ResScan Data Card Module
Please refer to the illustrations in section G of the illustration sheet.
The ResScan
Data Card module is an accessory to the S8 Elite II. Use a ResScan
Data Card with the Data Card module to collect data and update settings in the
S8 Elite II. The module and card give your clinician convenient access to data
about your treatment, and can provide you with new device settings from your
clinician without your having to leave home.
Attaching the Module
To attach the Data Card module, push it onto the data communications port at
the back of your S8 Elite II until it clicks into place (G-1).
Removing the Module
To remove the Data Card module, pull it off the back of the S8 Elite II (G-2).
Note: To protect the data communications port, always ensure there is a
module attached to the device.
Using the Data Card to Collect data
Please refer to the illustrations in section H of the illustration sheet.
If your clinician needs to review your treatment, they will ask you to use the Data
Card to copy data from your S8 Elite II, and to return the card to them. The Data
Card will be provided in a convenient mailback envelope.
Data is copied onto the Data Card when it is inserted into the device. The original
data will remain stored on the device.
It takes up to 30 seconds to copy data onto the Data Card.