Filter
Top Products
Kids UP Series www.pridemobility.com 27
ADDUCTOR PADS
BOLTS
Adjustment of the Hip Guides (Adductors) or
Armrests/Hip Guides (Kids FAST)
1. Slotted adductor brackets should always be
adjusted as far apart as possible. This will allow the
seat cushion to be properly installed. See
figure 34.
2. Adductor pads can accommodate a wide range of
hip widths by adding or removing layers of 0.25-in.
(0.64-cm) foam from the pad cover. Extra wide
adductor covers are available.
Adjustment of the Adductors and Lateral
Supports (Kids ROCK 2 and ROCK 3)
1. The position of the lateral support plate can be
adjusted using a 5/32-in. hex driver. See figure 35.
2. Loosen bolts and adjust to desired position.
3. Tighten bolts after adjustment.
4. Hip width can be adjusted by adding or removing
layers of 0.25-in. (0.64-cm) foam from adductor
covers. See figure 36.
V. COMFORT ADJUSTMENTS
Figure 34. Kids FAST Adductors
Figure 35. Kids ROCK 2 and ROCK 3 Lateral Plate
Adjustment
Figure 36. Kids ROCK 2 and ROCK 3 Hip Width
Adjustment