Filter
Top Products
Kids UP Series www.pridemobility.com 23
4. USE TOOLS TO TIGHTEN THE BOLT THREE COMPLETE ROTATIONS.
1. ATTACH CABLES.
5. VERIFY HANDLE LATCHES IN ACTIVE POSITION.
2. INSERT BOLT ASSEMBLY.
3. TIGHTEN NUT WITH FINGERS.
ACTIVE Handle Lever Installation Instructions
The ACTIVE handle lever may be removed for shipping to prevent damage to the wheelchair. It must be installed
to enable full functionality of the wheelchair. See figures 25 and 26.
You may need the following to install the ACTIVE handle lever:
7/16-in. nut driver
5/32-in. hex wrench
IV. ASSEMBLY
Figure 25. ACTIVE Handle Lever Hardware
Figure 26. ACTIVE Handle Lever Installation Instructions
SPRING
NYLON
WASHER
ACTIVE HANDLE LEVER
ACTIVE HANDLE (BACK BAR ON WHEELCHAIR)
BOLT
NUT