Filter
Top Products
Kids UP Series www.pridemobility.com 21
ANTI-TIP WHEEL
SNAP
BUTTON
WHEEL AXLE BUTTON
IV. ASSEMBLY
INITIAL ASSEMBLY OF YOUR KIDS UP
SERIES WHEELCHAIR
The original package contains the following
components:
Kids UP Series Wheelchair
Two rear wheels
Two anti-tip wheels (only Kids ROCK 2 and
ROCK 3)
Additional options and accessories as ordered
WARNING! Contact your health care
professional before using this
wheelchair with a child.
To unpack the Kids UP Series Wheelchair:
1. Keep box upright.
2. Verify the package is in good shape and no damage
has occurred during shipping.
3. Remove the Kids UP Series Wheelchair and
accessories from the packaging.
4. Ensure your order is complete.
To assemble the Kids FAST Wheelchair:
1. Make sure the attendant wheel lock lever is
released. See figure 7.
2. Align the rear wheel with the axle on the
wheelchair.
3. Press the clip on the wheel and slide the wheel onto
the axle. Release the clip. See figure 20.
4. Make sure that the wheel clip is fully engaged by
pulling outward on the wheel without pressing on
clip. If wheel cannot be removed, clip is properly
engaged.
5. Repeat for the rear wheel on the other side.
6. Fold the frame and seatback into the upright
position. See III. “Your Wheelchair.”
7. Install the calf protector. See figures 23 and 24.
8. Make additional adjustments to the wheelchair as
necessary. See V. “Comfort Adjustments.”
To assemble the Kids ROCK Wheelchairs:
1. Make sure the manual wheel lock is released. See
figure 8 or 9.
2. Put the axle through the wheel hub.
Figure 20. Kids FAST Rear Wheel
Figure 21. Kids ROCK 2 and ROCK 3 Rear Wheel
WHEEL CLIP
Figure 22. Kids ROCK 2 and ROCK 3 Anti-tip Wheels
ANTI-TIP WHEEL