Filter
Top Products
Jazzy 1133 Owner’s Manual Rev B 03-03 www.pridemobility.com 39
WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds.
Wear goggles and gloves when handling batteries and wash hands after handling.
WARNING! Power chair batteries are heavy. See specifications table. If you are unable to lift that much
weight, be sure to get help. Lifting beyond your capacity can result in personal injury.
To replace the batteries:
1. Remove each battery box. See V. Disassembly.
2. Remove the fasteners that attach the battery box lid to the battery box. See figures 29 and 30.
3. Disconnect the battery harness.
4. Remove the battery from the battery box.
5. Install the new battery into the battery box. Make sure that the terminals are facing the the correct direction. Refer to
the battery layout label on the bottom of each battery box. See figure 31. The battery terminals in the front battery box
face the the back of the box. The battery terminals in the rear battery box face the front of the box. When both batteries
are installed correctly, the battery terminals face each other.
6. Install the battery harness onto the new battery. Connect the black lead to the negative (-) battery terminal and the red
lead is connected to the positive (+) battery terminal. See figures 29 and 30.
7. Reinstall the battery box lid.
WARNING! Make sure you tighten the fasteners so that the connections are secure.
6. Reinstall the battery boxes onto the power base.
NOTE: Contact your authorized Pride provider for battery recycling/disposal information.
IX. CARE AND MAINTENANCE
Figure 29. Jazzy 1133 Rear Battery Box
Figure 30. Jazzy 1133 Front Battery Box
BACK
FRONT
LID
LEADS GO
UNDER HANDLE
FRONT
BACK
POSITIVE LEAD
HAS FUSIBLE LINK*
*NOTE: CHECK BATTERY
TERMINALS FOR POS (+) AND
NEG (-) TERMINAL LAYOUT.
POSITIVE LEAD
HAS FUSIBLE LINK*
LEADS GO
UNDER HANDLE
LID