Pride Mobility Jazzy1133 Mobility Aid User Manual


 
Jazzy 1133 Owner’s Manual Rev B 03-03 www.pridemobility.com 21
Figure 11. Footrest Bracket
BALL DETENT PIN
4. Flip up the safety latch.
WARNING! Make sure latch is flipped
down before using your power chair.
5. Squeeze together the two seat latches and lift the seat
up enough to release it from the front seat bar. See
figure 9.
6. Hold the seat at the base of the seatback and the
front of the seat base.
7. Lift the seat off the power base and set it aside.
WARNING! Do not pick up the seat frame
by the armrests. They are free to pivot,
and you may lose control of the seat if
they do so, resulting in personal injury
and/or damage to the chair.
8. Unplug the left and the right motor connectors. See
figure 6.
9. Push down both battery box release levers. See
figure 10.
CAUTION! Make sure that both battery
box release levers are in the up (locked)
position during reassembly.
10. With one hand, hold the front battery box by the
handle. See figure 8.
11. With the other hand, hold the back battery box by
the grip on the back (see figure 6) and pull it rear-
wards until you disconnect it from the front battery
box.
12. Slide the rear battery box off the frame and set aside.
13. Slide the front battery box rearward and lift it off the
frame. Set it aside.
14. Remove the ball detent pin from the footrest
bracket. See figure 11.
V. DISASSEMBLY
Figure 10. Back Battery Box Release Lever
BATTERY BOX RELEASE LEVER (IN DOWN POSITION)
Figure 9. Seat Latches
SEAT LATCHES
FRONT SEAT-FRAME BAR
Figure 12. Front Seat Tower
BALL DETENT PIN
SEAT FRAME BRACKET
SEAT TOWER
SAFETY LATCH