Pride Mobility Jazzy1133 Mobility Aid User Manual


 
Jazzy 1133 Owner’s Manual Rev B 03-03 www.pridemobility.com 25
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to the floor.
2. Loosen the jam nuts. See figure 19.
3. Loosen the adjusting screw.
4. Turn the adjusting screw clockwise to raise the front of the
armrest, or turn the adjusting screw counterclockwise to lower
the front of the armrest. See figure 19.
5. Tighten the jam nuts to lock the adjusting screw into place.
Footrest Height
The footrest height is easily adjusted to one of four different heights in
1-in. increments.
To raise or lower the footrest:
1. Remove the fasteners from footrest bracket. See figure 20.
2. Raise or lower the footrest to the desired height.
3. Reinstall the fasteners into the footrest bracket and tighten.
Footrest Depth
To adjust the footrest depth:
1. Remove the fasteners from the footrest bracket. See figure 20.
2. Move the footrest in or out to the desired depth.
3. Reinstall the fasteners into the bracket and tighten.
Footrest Angle
You can adjust the angle of the footrest with a hex key. See figure 21.
To adjust the footrest angle:
1. Turn the setscrew counterclockwise to raise the front of the footrest.
2. Turn the setscrew clockwise to lower the front of the footrest.
Swing-away Footrests (Optional Equipment)
Swing-away Footrests (SFRs) enable you to rotate the leg rests to the
side before you transfer on or off your Jazzy.
To move the SFRs:
1. Push in the release lever. See figure 22.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two screws from the side of each leg rest extension.
See figure 24.
2. Slide the leg rest in or out to the desired length.
3. Tighten the bolt and reinstall the two screws.
VI. COMFORT ADJUSTMENTS
Figure 21. Bottom of Footrest
SETSCREW
Figure 20. Footrest Height and Depth
Adjustment
FOOTREST
BRACKET
FASTENERS