Filter
Top Products
Go-Chair www.pridemobility.com 21
IV. ASSEMBLY/DISASSEMBLY
Figure 12. Toggle Latch OpenFigure 11. Toggle Latch Closed
TOGGLE LATCH
RELEASE BUTTON
Figure 13. Rear Section Positioning Figure 14. Align Frame Sections
Figure 15. Lift Front Section
CURVED LOCKING
BRACKET
PEG
3. Grasp the foot platform and lift the front section to a vertical
position on the rear section. See figure 15.
4. Secure the toggle latch to the locked position. See figure 11.
WARNING! Prevent product damage! Ensure that
the toggle latch buckle is securely fastened to the
retainer before operating the Go-Chair.
5. Grasp the foot platform and lower the assembled frame sections to
the floor.
6. With the battery box tilted forward slightly, place it on the power
base, then push the back of the battery box down until it is firmly
in place.
7. Install the seat and plug the controller connector into the power
base. See figure 6.