Filter
Top Products
2928
Specifications
Name: OMRON Wrist Blood Pressure Monitor
with Advanced Positioning Sensor (APS
®
)
Model: HEM-637
Display: Digital display
Measurement: Oscillometric method
Measurement Range: Pressure; 0 to 299 mmHg, Pulse rate; 40 to 180 /min.
Accuracy: Pressure; within +/-3 mmHg, Pulse rate; within
+/-5% of reading
Inflation: Automatic inflation with pump
Deflation: Automatic rapid deflation
Pressure Detection: Electrostatic capacity semi-conductor pressure sensor
Power Supply: Two AAA batteries
Battery Life: Approximately 300 times of measurement when using
alkaline batteries (In case of the monitor is used three
times a day inflating to 170 mmHg at the room
temperature of 72°F)
Operating Temperature
and Humidity : +50° to +104°F, 30 to 85% RH
Storage Temperature
and Humidity : -4° to +140°F, 10 to 95% RH
Measurable
Circumference of Wrist : 5
1
/
4
'' to 8
1
/
2
''
Weight of Main Unit : Approximately 5
1
/
2
oz (not including batteries)
External Dimensions : 3'' (W) x 2
1
/
2
'' (H) x 1
1
/
2
'' (D) (not including
the wrist cuff)
Electric Shock Protection : Internal power supply appliance type B
Accessories : Two AAA alkaline batteries, Carrying case,
Illustrated Instruction Manual
Note: These specifications, to improve performance, are subject to change without notice.
FCC Caution
Caution:
Changes or modifications not expressly approved by Omron Healthcare,
Inc. could void the user’s authority to operate this product.
Note:
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)
This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. The product generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If the product does cause harmful interference to radio
or television reception, which can be determined by turning the product on and off, the user
is encouraged to try to correct the interference by one or more of the following measure:
• Reorient or relocate the receiving antenna
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for Canada only)
This digital apparatus does not exceed the Class B limits for radio emissions from digital
apparatus as set out in the interference-causing equipment standard entitled “Digital
Apparatus”, ICES-003 of the canadian Department of Communications.
Cet appareil numerique respecte les linites de bruits radioelectriques applicables aux
appareils numeriques de Classe B prescrites dans la norme sur le materiel brouileur:
“Appareils Numeriques.” NMB-003 edictee par le ministre des communications.
HEM-637 REV A 8188 1/26/06 1:41 PM Page 28