Filter
Top Products
2726
Care and Maintenance
To keep your digital wrist blood pressure monitor in the best condition and protect
the unit from damage follow the directions listed below:
• Clean the monitor with a soft dry cloth. Do not use any abrasive or volatile cleaners.
• Do not attempt to clean the wrist cuff.
• Never immerse the monitor or any components in water.
• Store the monitor in a safe and dry location. Do not subject the monitor
to extreme hot or cold temperatures, humidity and direct sunlight.
• Avoid subjecting the monitor to strong shocks such as dropping on the floor.
• Remove the batteries if the unit will not be used for an extended period of time.
• Use the unit consistent with the instruction provided in this manual.
• Never inflate the unit over 299mmHg or attempt to disassemble the monitor.
• Use only authorized parts and accessories.
Troubleshooting
Cause How to correct
You moved your wrist
during measurement.
Measure your blood
pressure again without
moving your wrist until
the measurement
is completed.
Error
After several seconds
You moved your arm
or body, or talked
during measurement.
Measure your blood
pressure again without
moving your arm
or body.
After several seconds
You moved your arm
or body extensively
during measurement.
Measure your blood
pressure again without
moving your arm
or body.
After several seconds
Batteries are worn out. Replace both batteries
with new ones.
Battery replacement
mark flashes.
Trouble caused by
abnormality in function.
Please contact the nearest
OMRON Healthcare,
Inc. Customer Service.
Only E and numerals
are displayed.
HEM-637 REV A 8188 1/26/06 1:41 PM Page 26