Filter
Top Products
R-4108.A
REPAIR
ANO
ADJUSTMENT
4.
Wobbling in X (right
and
left) Movement
(1
)-b)
If
a~y
dent
is
found on the
guide
rails
@ , @ ,
the
rollers@
or if the retainer
(})
is
deformed, replace them with spares.
Procadure
i)
Foilow the procedure i),
ii)
of
(1)-a).
ii)
Replace
dented or deformed parts with spares.
ili) Follow the reassembling procedure.
iv)
Check wobbling
in
the X movement.
(i)-c)
Dust
or
soil
on teeth
of
the rack @
and
pinion
e@
are
to
be
removed
by
a
brush
or
cleaned by gasoline.
lf they
are
ínjured, replace them with spares.
Procedure
í)
Follow the procedure
i)
of
( 1
)-a).
ii)
Remove
the rack @ releasing the
screws
@ x
2.
iii)
Remove
the handle assembly releasing
the
screws
c@x
2
of
the pinion cover
®·
iv)
Follow
the
procedure
ii)
of
the
above
( 1
)-a).
v)
Follow the disassembling procedure
6)-13)
(P.
4).
vi)
Remove
dust and
soil
by
a brush
or
clean
by
gasoline. Replace injured parts with
spares.
vii)
Follow the reassembling procedure.
viii)
Check wobbling in the X movement.
-
14-