Filter
Top Products
Positioning Control Advanced Positioning 4
4-2
X axis
< Circular interpolation
when an auxiliary point is specified >
End point
Start point
Y
axis
Auxiliary
line
X axis
< Circular interpolation when the radius is specified >
End point
Start point
Y
axis
Radius
X axis
< Circular interpolation when the center is specified >
End point
Start point
Y axis
Center
Speed change in X axis
Speed
Time
< Circular interpolation >
- Circular interpolation controls two or
more axes so that the start point and
the end point (target position) are
connected with circular arc.
- As there are innumerable number of
arc locus connecting two points, an
auxiliary point, the arc radius, the
center or the direction should be
specified in addition to the start point
and the end point to determine the
circular arc.
- Models applicable to 2-axis circular
interpolation control
[FX-20GM,E-20GM,FX
2N
-20GM
AD75P2/P3,AD75M2/M3,
QD75P2/P4,QD75D2/D4,
A171SH,A172SH,A173UH,A273UH]
- Models applicable to 3-axis circular
interpolation control
[A171SH,A172SH,A273UH]
- Application examples
[Steel sheet fusing, welder, applicator,
crane, etc.]