Filter
Top Products
Stratos LV/LV-T Technical Manual 143
1. Insert the enclosed torque wrench
through the perforation in the self-
sealing plug at an angle perpendicular
to the lead connector until it is firmly
placed in the setscrew.
2. Insert the lead connector pin into the
connector receptacle of the CRT-P
without bending the lead until the
connector pin becomes visible behind
the setscrew. Hold the connector in
this position.
3. Securely tighten the setscrew of the
connector clockwise with the torque
wrench until torque transmission is
limited by the wrench.
4. After retracting the torque wrench, the
perforation will self-seal. The proximal
electrode of bipolar leads is
automatically connected. Connect the
second lead as described above.
5. Attach the other ventricular lead to the
right ventricular port (RV) and the atrial
lead to the right atrial port (RA) in the
same manner.