Filter
Top Products
Settings
50
Standby
To save energy, the display goes out
after 10 minutes and the indicator light
for the Start button starts flashing
slowly.
To come out of Standby mode:
Move the programme selector or
press Start. Neither will have any
effect if a programme is running.
On
Standby function is activated and the
indicator lights will go out after 10
minutes:
– if a programme is not selected after
the dryer has been switched on.
– after a programme has started.
They will, however come on for 10
minutes at the end of the programme or
the end of the anti-crease phase. The
buzzer (if selected) will sound for 10
minutes at the end of the programme.
Not in current programme (factory
default setting)
As described under "On".
However, indicator lights will stay on
when the programme has started and
remain visible during the programme.
Off
Indicator lights will stay on while the
dryer is switched off.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
Press Start and keep it pressed in
whilst carrying out steps -.
Switch the dryer on.
Wait until the indicator light for the
Start button comes on . . .
. . . and then release the Start
button.
Turn the programme selector to
Cottons Machine iron.
The Empty container indicator light will
flash eight times.