Filter
Top Products
Settings
49
Altering the standard drying
level in the"Automatic plus"
programme
The drying level for this programme is
set at a standard Normal level. You
have the option of changing to Hand
iron (damper than Normal) or to
Normal+ (drier than Normal).
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
Press Start and keep it pressed in
whilst carrying out steps -.
Switch the dryer on.
Wait until the indicator light for the
Start button comes on . . .
. . . and then release the Start
button.
Turn the programme selector to
Cottons Hand iron.
The Empty container indicator light will
flash six times.
The option selected will be displayed
by a number which will alternate with
.
Standard setting - Hand iron
The standard drying level will
remain on the Normal setting
(factory default setting)
(The Clean out airways indicator light
will also flash once)
Standard setting will be Normal+
(The Clean out airways indicator light
will also flash twice)
Pressing the Start button switches
between the options.
Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking.