Filter
Top Products
Installation and connection
38
Rear view
a
Protruding lid for holding when
moving the dryer (see arrows)
b
Mains connection cable
Transporting the dryer
To manoeuvre the dryer out of its
packing case to its installation site,
– hold it by the front feet
– as well as by the edge of the lid
where it protrudes to the rear of the
dryer.
Only transport the dryer as
shown in the following illustrations.
If transporting the dryer at an
angle, only tip towards the left side.
If the tumble dryer has not been
transported as described, then it
must be left to stand for at least 1
hour before it is connected to the
electricity supply. Otherwise the heat
pump can be damaged.