Filter
Top Products
Cleaning and care
29
Replacing
Fit the filter back on the handle. Make
sure it is the correct way round.
To ensure that the filter is positioned
correctly in the front of the heat
exchanger unit:
First insert the handle with the filter
attached over the two guide pins.
Make sure that the yellow dot on the
handle is on the right.
Push the filter in completely
Close the access panel.
The filter must be fitted correctly
and the access panel closed to
ensure that water cannot leak from
the condenser system and to ensure
that the dryer functions efficiently.
Tumble dryer
Disconnect the tumble dryer
from the mains electricity supply.
Do not use solvents, abrasive
cleaners, glass cleaners or multi-
purpose cleaning agents. These
could damage plastic surfaces and
other parts.
Clean the tumble dryer with a slightly
damp cloth and a mild non-abrasive
cleaning agent or a solution of
washing-up liquid and water.
Clean the seal around the inside of
the door with a damp cloth.
Dry all parts with a soft cloth.
The drum and other stainless steel
parts can be cleaned with a suitable
proprietary stainless steel cleaner
following the manufacturer's
instructions.