Filter
Top Products
How to dry correctly
17
Brief instructions
The headings numbered (, , ...)
show the operating sequence and can
be used as a brief guide to using your
dryer.
Sort the laundry
To ensure an even drying result sort
laundry according to:
. . . the drying level required
. . . the type of fibre or weave
. . . size
. . . the moisture content after spinning.
Make sure that objects e.g.
detergent dispensing balls have
been removed from the laundry.
They could melt, and cause damage
to the dryer or the laundry.
– Check seams and stitching to ensure
that padding and linings are intact.
– Fasten duvet covers, pillow cases
etc. to prevent small items from
being rolled up inside them.
– Close any zips, fasten hooks and
eyes etc before washing.
– Fasten any loose belts and ties
– Underwiring and collar stiffeners: Any
loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
Turn on the tumble dryer
The tumble dryer may be switched on
after loading, saving energy as the light
will not come on.
Switch the dryer on by pressing the
On/Off button in.
Load the tumble dryer
Press the Door button to open the
door.
Unfold the laundry and load loosely
into the drum.
Do not overload the drum. See the
"Programme chart" for
recommended loads for each
programme. Overloading can cause
unnecessary wear and tear to the
laundry and give a disappointing
drying result.
Before closing the door make sure
the fluff filter is correctly positioned in
the door.
Check the laundry is right inside the
drum so that it cannot get trapped or
damaged when the door is shut.
Shut the door either with a gentle
swing, or lean against it and push it
shut.