Filter
Top Products
How to dry correctly
18
Select a programme
Turn the programme selector
clockwise or anti-clockwise to the
required programme.
Start the programme.
Press the Start button.
The indicator light for the Start button
will now light up constantly.
Notes
– The programme duration shown in
the display is an estimation and can
vary.
– This dryer measures residual
moisture content in the laundry to
ensure perfect drying results.
However, if dry laundry is loaded into
the drum, it will be dried/aired for a
set duration.
Avoid overdrying items of laundry as
these can become damaged.
Remove the laundry when the
programme has finished
There is a cooling down phase at the
end of the drying sequence The
programme is not finished until lights
up and the buzzer sounds.
The drum will continue to rotate at
intervals for up to two hours to prevent
laundry creasing, if you do not wish to
remove it immediately (anti-crease
phase). There is no anti-crease phase at
the end of the Woollens programme.
The duration of the cooling down phase
is variable; see "Settings".
Press the Door button.
Open the door.
Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
Press the button to switch the
dryer off.
Clean the fluff filters
Close the door.
Empty the condensed water
container.