Filter
Top Products
41
Press the M button and the day will
flash. Press the C button to change the
day. Pressing the M button again will
display the new date setting.
You may now turn the meter off or
press the M button to move to the
next option.
Beep Prompts
The meter is set to provide you with
audio prompts, or “beeps,” during
the test procedure to tell you that the
meter has performed some function
or to alert you to a special message.
To change the Beep option setting,
enter the set-up mode (see page 37).
Use the M button to choose the Beep
option. The current setting will
appear on the display.
With the setting, the meter will
continue to provide beep prompts
during the test procedure.
To change the Beep option setting
so that the meter operates silently,
press the C button.
will appear on the display. You
may now turn the meter off or press
the M button to move to the next
option.