Filter
Top Products
39
Clock (Time and Date)
The ONE TOUCH
™
BASIC
™
Plus
Meter has an internal clock that will
record the time and date of each
test you perform. Your meter has
been set to automatically record tests
both when the Clock option is set to
and when it is set to .
You may need to change the time
setting in your meter to have the
correct time and date appear with
your test result. You will also need
to reset the time whenever there is a
change to or from daylight saving
time.
Once the Clock option is set to ,
you are ready to set the time.
Note: The accuracy of your test
results will not be affected if you
do not set the Clock option to the
correct time and date or if you
choose not to display the time
and date.
Note: The first time you enter the
set-up mode, the Clock option
will be preset to . To set the
Clock option to , see page 37,
“Entering and Using the Set-Up
Mode.”