Filter
Top Products
When
BATTRY`
REPLACE NOW
appears flashing on
the display, the meter will no longer give
results and you must replace the batter-
ies before you can perform another test.
Dead batteries or battery removal will
not affect the information stored in the
meter memory. The time and date will
be saved in the meter for approximately
an hour without the batteries.
Step 1: Turn the meter over and locate
the battery compartment door.
Make sure the meter is turned off before
you remove the batteries.
Step 2: Remove the
battery compart-
ment door.
Turn the meter
over so that the
front is resting in the palm of your
hand. With your thumb, press upward
on the opening tab
of the battery
compartment door
and lift upward
until it releases
from the clasp.
67