Filter
Top Products
CLEANING THE METER
DO A DAILY CHECK: Look through
the small hole in the test strip holder to
make sure there is no lint, dirt, or blood
blocking it.
If there is anything blocking the hole, or
if the test area has dirt, lint, or blood on
it, remove the test strip holder and clean
the test area by following the instructions
given below. Then do a check strip test.
Clean the meter and test strip holder:
• At least once each week
• Whenever the test area looks dirty
• Whenever CLEAN TEST AREA
appears on the display.
Clean the meter using these easy steps:
Step 1: Remove the test strip holder
from the meter.
Hold the meter and place your thumbs on
the two raised dots on the test strip holder.
Press down on the raised dots and slide
the test strip holder toward you.
Remove the test strip holder to expose
the test area.
63
CM